

Sebastian Inlet features nearshore rock reefs extending for miles south of the inlet. Divers access these reefs via a shore entry located 15 metres from the shore. The site reaches depths between 5 and 22 metres, with an average depth of 13 metres. Conditions vary, with visibility typically ranging from 5 to 10 metres and moderate currents present. Divers should be aware of potential hazards including surf, strong currents, rip currents, low visibility, and entanglement. Diving is prohibited under the Sebastian Inlet Bridge and within the boat channel. Facilities available at the park include parking, toilets, showers, changing rooms, a rinse station, and access to boat charters.
27.85576, -80.45350
The safest time to explore the tidal pool is during an in-coming high tide, as the current is then moving toward the shore line.
Located on State Road A1A 15 miles south of Melbourne Beach.
Recorded at this site
Depth
5-22m
Visibility
5-10m
Entry
Shore
Water Temp
19-27°C
Current
Moderate
Typical Dive
45 min
Due to the presence of surf, strong currents, and rip currents, this site requires careful planning and may be challenging for inexperienced divers.
The site ranges from 5 to 22 metres in depth, with an average depth of 13 metres.
The site is accessible via shore entry, located 15 metres from the shore, though boat charters are also available.
Divers should be cautious of surf, strong currents, rip currents, low visibility, and potential entanglement.
Diving at Sebastian Inlet in Melbourne Beach requires the following certifications: Open Water. Always dive within your training limits.
A 5mm wetsuit is recommended for diving at Sebastian Inlet in Melbourne Beach. Water temperatures range from 19°C to 27°C.
Expect moderate currents at Sebastian Inlet in Melbourne Beach. Good buoyancy control and some drift diving experience is helpful.
Visibility at Sebastian Inlet in Melbourne Beach typically ranges from 5 metres to 10 metres. Conditions vary with weather, tides, and seasons.