

Best for advanced divers, Up to 24m, shore & boat entry, strong current.
Whirlpool Cove at Miller's Point is a reef and drift dive site defined by a turbulent gap between rock formations. The site is named for the powerful vortices created in the gap during strong surges, where water levels can fluctuate by over two metres in seconds. Located 50 metres offshore, the site reaches a maximum depth of 24 metres. Conditions are variable, with visibility ranging from 2 to 15 metres and water temperatures between 15C and 18C, often influenced by a thermocline. Due to the strong currents, surge, and depth, this site is suitable only for advanced divers. Access is available via both shore and boat entries.
-34.28289, 18.82627
Alternative exits at Percy’s Hole if conditions deteriorate badly during a dive.
Park at paved parking area on seaward side of road on Faure Marine Drive (R44) above dive site. The path is not clear, so check it out before kitting up. Shore access requires a long walk down steep rocks.
Recorded nearby, within 20km
Depth
Up to 24m
Visibility
2-15m
Skill Level
Advanced
Entry
Shore & Boat
Water Temp
15-18°C
Current
Strong
No, this site is suitable only for advanced divers due to the strong currents, surge, and depth.
The site reaches a maximum depth of 24 metres.
Yes, access to the site is available via both shore and boat entries.
Conditions are variable with visibility ranging from 2 to 15 metres and water temperatures between 15C and 18C, often influenced by a thermocline.
The site presents hazards including deep water, strong currents, and surge.
Diving at Whirlpool Cove in Gordon's Bay requires the following certifications: Advanced. Always dive within your training limits.
A 7mm wetsuit or semi-dry is recommended for diving at Whirlpool Cove in Gordon's Bay. Water temperatures range from 15°C to 18°C.