

Best for intermediate divers, 17-30m, boat entry, strong current.
Hammerhead Guard Rock is a challenging marine site in the Marquesas Islands featuring a combination of reef, wall, and drift diving. The topography descends from 17 to 30 metres, with an average depth of 27 metres. Strong currents are a defining characteristic, often requiring careful planning and boat-based drift exits. Visibility is variable, ranging from 5 to 20 metres, and divers should be prepared for surge. Due to the demanding current and potential for low visibility, this site is suited for intermediate divers. Boat access is required, and divers should maintain constant awareness of current shifts and surface conditions throughout the 50-minute dive.
-8.93120, -140.10298
Current strength and direction can shift quickly, so brief thoroughly with your operator and agree on an abort signal before descending. Keep your SMB accessible from the start of the dive, as pick-up conditions on drift exits here can be demanding.
Accessible by boat from the village of Taiohae on Nuku-Hiva.
Recorded at this site
Depth
17-30m
Visibility
5-20m
Skill Level
Intermediate
Entry
Boat
Boat required
Water Temp
27-29°C
Current
Strong
Typical Dive
50 min
Divers must manage strong currents, surge, and low visibility. Sharks are also present at this site.
No, this site is intended for intermediate divers due to the strong currents and variable visibility.
The depth ranges from 17 to 30 metres, with an average depth of 27 metres.
This is a boat-only dive site located 400 metres from the shore.
Water temperatures remain consistent throughout the year, ranging between 27 and 29 degrees Celsius.
Diving at Hammerhead Guard Rock in Taiohae requires the following certifications: Open Water. Always dive within your training limits.
A rashguard or 2mm shorty is recommended for diving at Hammerhead Guard Rock in Taiohae. Water temperatures range from 27°C to 29°C.